Repair IMEI on Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool

How to Repair IMEI on Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool

If you’re looking to repair the IMEI on your Qualcomm-based P50 Pro JAD-LX9 running EMUI 14.2, the DT Pro Tool is your solution. This guide will take you step by step through the process of restoring your device’s IMEI using this powerful tool.

🛠️ Tools Needed:

DT Pro Tool

Step-by-Step Instructions📋 

1. Launch the DT Pro Tool

Start by opening the DT Pro Tool on your computer. Make sure the tool is fully installed and up to date for best performance.

2. Navigate to the Brand Tab

Once the tool is open, go to the "Brand" tab in the interface.

3. Select the P50 Pro JAD-LX9 Model

Choose the P50 Pro JAD-LX9 from the list of models. Ensure the selected model is up-to-date and compatible with the latest security protocols.

4. Enter Test Point Mode

• Put your P50 Pro device into Test Point Mode to open the Qualcomm 9008 port.
• In DT Pro Tool, manually select the Qualcomm 9008 port to establish a connection.

5. Go to the Special Task Tab

Head over to the "Special Task" tab in the DT Pro Tool, where you’ll perform several key tasks:

• Backup Security (EFS/IMEI): Save your device’s security information, including the IMEI data.
• Backup Firmware: Create a full firmware backup for extra security.

6. Change Storage Type

• Switch from the Normal/Single RAW storage type to Encrypted mode.
• This step is critical for resetting the EFS and loading the backup file securely.

7. Select the RAW File

In the "Select RAW File" tab, choose the file labeled "(JAD) BootloaderImage.rev.dftpro". Make sure to check all the partitions before proceeding.

8. Enter Test Point Mode Again

After selecting the RAW file, put the phone back into Test Point Mode and click the "Write" button to flash the file onto the device.

9. Flash the Bootloader File

• After flashing, you’ll hear a distinctive sound signaling that the bootloader file has been successfully flashed.
• Now, proceed to flash the backup file that you saved earlier.

10. Select RAW File for RPL

• In the Select RAW File tab, choose the RPL file (which is a compressed file shared in the post).
• Extract the .rar file and load the RPL file. Ensure you’re in Encrypted mode before moving on.

11. Perform Test Point Again

Once again, enter Test Point Mode and press the "Write" button to begin flashing the RPL file.

12. Finish Writing the RPL File

After the RPL file is written, the Qualcomm 9008 port will remain active, indicating that the process is nearly complete.

13. Enter Manufacture Mode

• Dial *#*#2846579#*#* on the device to put it into Manufacture Mode.
• The phone will display "DBAdapter Reserved Interface", confirming you’re in the correct mode.

14. Repair the IMEI

Go back to the Special Task tab in DT Pro Tool and select the IMEI Repair option.

15. Input the Original IMEI Numbers

• Copy and paste the original IMEI numbers into the tool.
• You should hear a sound confirming the IMEI repair was successful.

16. IMEI Repair Complete

Once you hear the confirmation sound, the IMEI repair process is finished. Your P50 Pro JAD-LX9 is now restored with the correct IMEI numbers!

🎉 Final Thoughts

Using the DT Pro Tool, you can easily repair the IMEI of your Qualcomm P50 Pro JAD-LX9, ensuring it operates correctly and without errors. Follow each step carefully to avoid issues and ensure a smooth process.

Download Link

File Name: P50 Pro JAD-LX9 (EMUI 14.2)

Size: 70.1 MB

Download Link: Click here to download the required files | DT PRO TOOL

Credit: I do not own this software. All credit for the software goes to the original developer. 

Upload By: Erum Khan