IMEI Repair on Huawei Qualcomm Devices with EMUI14 Complete Guide

IMEI Repair on Huawei Qualcomm Devices with EMUI14 - New Flashing Tool

When software issues arise on Huawei or Honor devices with Qualcomm processors, an IMEI repair might be necessary. The DTpro team has provided a comprehensive guide detailing the two-step process for resolving network and IMEI issues on these devices.

Step 1: Preparation

1.1 Write the Bootloader Image

• Launch Qualcomm Module: Start by opening the Qualcomm Module software.

• Select Brand: Choose "Huawei and Honor Devices" and ensure e-Token authentication is active.

• Choose Model: Select your device model in the Xboot section.

• Choose Type: Select the "Encrypted!" type option.

• Load DT-File: Click on "Select DT-File" and load the Bootloader image file specific to your model.

• Connect Device: Connect your device in Qualcomm Mode [EDL].

• Write Bootloader Image: Press the Write button to upload the Bootloader image file to the device.

Step 2: Write IMEIs and Turn on Phone

2.1 Enter Manufacturer Mode

1. Dial Code: On your phone, open the dial pad and enter ##2846579##.
2. Navigate Settings: Go to "Project Menu" > "Background Settings" > "USB Ports Settings" > "Manufacture Mode".

2.2 Install Drivers

• Connect Device: Connect your phone to the PC.
• Install Necessary Drivers: Install the required drivers. If unavailable, install HiSuite and Honor Suite software. Link

• Verify Connection: Ensure your device is connected in Manufacturer Mode and the drivers are properly installed.

2.3 Configure Qualcomm Module

1. Select Port: In the Qualcomm Module, choose the DBAdapter Reserved Interface port.
2. Choose Special Task: Click on Special Task and select the IMEI repair option.
3. Enter New IMEIs: Input the new IMEI numbers when prompted and press OK.
4. Finish Operation: Wait for the operation to complete, confirming the IMEIs have been successfully repaired.

Repair Network

Following IMEI repair, some models may require a network repair operation due to device security or firmware version. The affected models include:

• Huawei Nova 9 SE
• Huawei Nova Y90
• Huawei Nova 11i
• Honor X7
• Honor X8 (some firmware)
• Honor 50 Lite (some firmware)
• Honor Magic 5 Lite
• Huawei Enjoy 60 Pro

Network Repair Procedure

• Select Model: In the list option of the Qualcomm Module, select your device model for network repair.

• Repair Network: Press the Repair Network button.

• Complete Operation: Wait for the operation to finish and restart your device.

Note: Some devices may require a factory reset after completing the repair process.

By following these steps, you can successfully repair the IMEI and network issues on your Huawei or Honor devices with Qualcomm processors.

Upload By: Erum Khan