(Rebirth) EPSON L3210 Resetter + Keygen Free - 2023

(Rebirth) EPSON L3210 Resetter + Keygen Free Download -2023

Is your Epson L3210 printer displaying a "Service Required" error? This guide explains how to safely reset the waste ink pad counter without resorting to potentially risky downloads.

Important Note: Resetting the waste ink pad counter is a temporary solution. The waste ink pad itself needs to be cleaned or replaced eventually.

Before you proceed:

Check the ink levels: If any ink cartridge is empty, refill it before resetting the counter.

Prepare for cleaning: Have absorbent paper towels and gloves ready, as you might need to clean the waste ink pad after resetting.

Resetting the Waste Ink Pad Counter:

• Access the Adjustment Mode: Power on your printer and press the "Menu" button repeatedly until "Adjustment Mode" appears.
• Enter the password: Use the arrow buttons to select "Waste Ink Pad Counter" and press "Enter." The password is usually "1434" or "2784." If unsure, consult your printer manual or contact Epson support.
• Reset the counter: Select "Main Pad Counter," "Pleten Pad Counter," and "Ink System Pad Counter," then press "Initialize" for each.
• Turn off and on: Turn off the printer for 10 seconds, then turn it back on.

Verifying the Reset:

1. Repeat steps 1 and 2 to access the Adjustment Mode and Waste Ink Pad Counter.
2. The percentages should now be near 0%. If not, consult your printer manual or contact Epson support.

Cleaning the Waste Ink Pad (Optional):

• If the percentages are still high, you may need to clean the waste ink pad.
• Locate the waste ink pad access hole (consult your manual).
• Wear gloves and absorb any excess ink with paper towels.
• Do not use water or cleaning solutions, as this can damage the printer.
• Dispose of the paper towels properly.

Remember:

1. Downloading and using third-party resetter tools can be risky and may damage your printer.
2. Resetting the counter is a temporary fix, and you'll need to address the waste ink pad eventually.
3. If you're uncomfortable performing the reset or cleaning yourself, contact Epson support for professional assistance.

Epson L3210 Waste Ink Pad Reset FAQs

Q: Is resetting the waste ink pad counter safe?

A: Resetting the counter is generally safe if done correctly. However, it's a temporary solution as the waste ink pad itself needs to be cleaned or replaced eventually. Downloading and using third-party resetter tools can be risky and may damage your printer.

Q: What happens if I don't reset the counter?

A: The printer will stop printing and display a "Service Required" error. Continued printing with a full waste ink pad can damage the printer.

Q: What tools do I need to reset the counter?

A: You don't need any special tools. You can access the reset option directly from the printer's menu.

Q: I'm not comfortable resetting the counter myself. What should I do?

A: You can consult your printer manual for detailed instructions or contact Epson support for professional assistance.

Q: How often should I clean the waste ink pad?

A: The frequency depends on your printing volume and ink usage. Monitor the waste ink pad levels through the Adjustment Mode and clean it when necessary.

Q: Can I use water or cleaning solutions to clean the waste ink pad?

A: No, never use water or cleaning solutions on the waste ink pad. This can damage the printer's sensitive components. Only use absorbent paper towels to soak up excess ink.

Q: Where can I find my printer's model number and password?

A: The model number is usually printed on a label at the back or bottom of the printer. The password is often "1434" or "2784," but consult your printer manual or contact Epson support if unsure.

Q: I still have questions or need further help. What should I do?

A: Feel free to leave a comment below or contact Epson support directly for personalized assistance.

Download Link

File Name: EPSON L3210 Resetter

Size: 2.4 MB

Download Link: MEGA || BOX || MediaFire || New Link

Password: sbz

Upload By: Erum Khan